ProductsProgrammable Logic Controller (PLC)

Programmable Logic Controller (PLC) Products

14 listed

Compare 14 Programmable Logic Controller (PLC) models from Siemens, Rockwell Automation and Mitsubishi Electric — sourced specs side by side.

3D/Depth Camera (RGB-D)Angular (Rotary) Gripper Anomaly Detection Model Area Scan Camera (2D)Articulated Robot Ball Screw / Lead Screw Battery Pack Bimanual Manipulation Platform CAD / Geometry Engine Centric (3-Jaw) Gripper Cycloidal / RV Reducer Deburring / Grinding Tool Electric Linear Actuator Electric Motor (Rotary)Encoder Fleet Management Software Force/Torque Sensor Grasp / Manipulation Model Hardware Harmonic / Strain Wave Drive Humanoid Robot Inertial Measurement Unit (IMU)Integrated Joint Actuator Legged Robot (Non-humanoid)LiDAR Scanner Linear Guide / Rail Magnetic Gripper Mobile Ground Robot (AMR/AGV)Motion Planning Library Motor Driver / Servo Drive Multi-Finger/Anthropomorphic Hand Planetary Gearbox Pre-trained Vision Model Proximity/Distance Sensor Robot Controller Robot Operating System / Middleware Robot Programming Environment SLAM / Navigation Software Safety Laser Scanner Safety Light Curtain Screwdriver/Drill EOAT Simulation Software Single-Board Computer / Embedded Soft / Adaptive Gripper System Integration Tactile / Pressure Sensor Tool Changer Two-Finger (Parallel) Gripper Vacuum/Suction Gripper Vision Processing Library

Siemens LOGO! 8

Siemens

Compact logic module (nano-PLC) for simple automation and small robot-cell auxiliaries, with onboard Ethernet and drag-and-drop function-block programming.

Siemens SIMATIC ET 200SP

Siemens

Scalable distributed I/O system with optional onboard CPU (open controller), hot-swap terminals and PROFINET, bringing control close to the machine.

Schneider Electric Modicon M340

Schneider Electric

Mid-range modular PLC for machine and process control with Ethernet/Modbus, CANopen and rich I/O, programmed in EcoStruxure Control Expert.

Omron NJ501 Machine Controller

Omron

High-performance Sysmac machine automation controller integrating sequence, motion (up to 64 axes) and robotics over EtherCAT, programmed in Sysmac Studio.

Allen-Bradley Micro850

Rockwell Automation

Compact economy PLC (Micro800 family) with expandable I/O, EtherNet/IP and Connected Components Workbench programming, for standalone machines and small cells.

Siemens SIMATIC S7-1500

Siemens

Siemens' flagship modular PLC for mid-to-high automation, with fast backplane, integrated motion/safety options, PROFINET and TIA Portal (IEC 61131-3) programming.

Siemens SIMATIC S7-1200

Siemens

Compact modular PLC for small-to-mid automation with onboard PROFINET, integrated I/O (e.g. 14 DI / 10 DO on CPU 1214C) and TIA Portal programming.

Schneider Electric Modicon M580

Schneider Electric

Schneider's ePAC modular controller with native Ethernet backplane, cybersecurity and redundancy, over Modbus TCP and EtherNet/IP, programmed in EcoStruxure Control Expert.

Omron NX1 Machine Controller

Omron

Omron's compact machine automation controller integrating logic, motion and safety over EtherCAT and EtherNet/IP, programmed in Sysmac Studio (IEC 61131-3).

Mitsubishi Electric MELSEC-Q Series

Mitsubishi Electric

Modular rack-based PLC platform for mid-to-high automation with multi-CPU support, high-speed backplane and CC-Link/Ethernet, programmed with GX Works.

Mitsubishi Electric MELSEC FX5U

Mitsubishi Electric

Compact all-in-one PLC (MELSEC iQ-F) with built-in I/O (e.g. 16 DI / 16 DO), analog, positioning and Ethernet/CC-Link IE, programmed with GX Works3.

Beckhoff CX Embedded PC

Beckhoff

PC-based control via Beckhoff's CX embedded PCs running TwinCAT with EtherCAT — combining PLC, motion and robotics in one IEC 61131-3 platform.

Allen-Bradley ControlLogix

Rockwell Automation

Rockwell's high-availability modular chassis PLC for large and process applications, with EtherNet/IP, redundancy options and Studio 5000 (IEC 61131-3) programming.

Allen-Bradley CompactLogix 5380

Rockwell Automation

Mid-range Rockwell PLC with dual Ethernet ports, integrated motion and safety options and Studio 5000 (IEC 61131-3) programming for machine-level control.