Skip to content
ProductsAngular (Rotary) Gripper

Angular (Rotary) Gripper Products

10 listed

Compare 10 Angular (Rotary) Gripper models from SMC — sourced specs side by side: Actuation, Weight and Gripping Moment.

3D/Depth Camera (RGB-D)Anomaly Detection ModelArea Scan Camera (2D)Articulated RobotBall Screw / Lead ScrewBattery PackBimanual Manipulation PlatformCAD / Geometry EngineCentric (3-Jaw) GripperCycloidal / RV ReducerDeburring / Grinding ToolElectric Linear ActuatorElectric Motor (Rotary)EncoderFleet Management SoftwareForce/Torque SensorGrasp / Manipulation ModelHardwareHarmonic / Strain Wave DriveHumanoid RobotInertial Measurement Unit (IMU)Integrated Joint ActuatorLegged Robot (Non-humanoid)LiDAR ScannerLinear Guide / RailMagnetic GripperMobile Ground Robot (AMR/AGV)Motion Planning LibraryMotor Driver / Servo DriveMulti-Finger/Anthropomorphic HandPlanetary GearboxPre-trained Vision ModelProgrammable Logic Controller (PLC)Proximity/Distance SensorRobot ControllerRobot Operating System / MiddlewareRobot Programming EnvironmentSLAM / Navigation SoftwareSafety Laser ScannerSafety Light CurtainScrewdriver/Drill EOATSimulation SoftwareSingle-Board Computer / EmbeddedSoft / Adaptive GripperSystem IntegrationTactile / Pressure SensorTool ChangerTwo-Finger (Parallel) GripperVacuum/Suction GripperVision Processing Library

SMC MHW2-50

SMC

180deg angular pneumatic gripper, 50mm body; fingers rotate flush against the body via rack & pinion for space-saving retraction. 8.27 N.m effective gripping moment.

SMC MHW2-40

SMC

180deg angular pneumatic gripper, 40mm body; fingers rotate flush against the body via rack & pinion for space-saving retraction. 3.70 N.m effective gripping moment.

SMC MHW2-32

SMC

180deg angular pneumatic gripper, 32mm body; fingers rotate flush against the body via rack & pinion for space-saving retraction. 1.61 N.m effective gripping moment.

SMC MHW2-25

SMC

180deg angular pneumatic gripper, 25mm body; fingers rotate flush against the body via rack & pinion for space-saving retraction. 0.73 N.m effective gripping moment.

SMC MHW2-20

SMC

180deg angular pneumatic gripper, 20mm body; fingers rotate flush against the body via rack & pinion for space-saving retraction. 0.30 N.m effective gripping moment.

SMC MHT2-63

SMC

Toggle-mechanism pneumatic angular gripper, 63mm bore, 106 N·m gripping moment at 0.5 MPa; the lever-toggle action keeps holding the workpiece even if air pressure drops or is lost.

SMC MHT2-50

SMC

Toggle-mechanism pneumatic angular gripper, 50mm bore, 63 N·m gripping moment at 0.5 MPa; the lever-toggle action keeps holding the workpiece even if air pressure drops or is lost.

SMC MHT2-40

SMC

Toggle-mechanism pneumatic angular gripper, 40mm bore, 36 N·m gripping moment at 0.5 MPa; the lever-toggle action keeps holding the workpiece even if air pressure drops or is lost.

SMC MHT2-32

SMC

Toggle-mechanism pneumatic angular gripper, 32mm bore, 12.4 N·m gripping moment at 0.5 MPa; the lever-toggle action keeps holding the workpiece even if air pressure drops or is lost.

SMC MHC2

SMC

Pneumatic angular (pivoting) 2-finger gripper across 5 bore sizes (6-25mm), double- or single-acting; jaws pivot 30° to -10° via a double-piston mechanism, holding moment 0.024-1.36 N·m -- for odd-shaped or space-constrained parts a linear-stroke gripper can't reach.