ProductsForce/Torque Sensor

Force/Torque Sensor Products

5 listed

Compare 5 Force/Torque Sensor models from ATI Industrial Automation, Link-touch and Robotiq — sourced specs side by side.

3D/Depth Camera (RGB-D)Angular (Rotary) Gripper Anomaly Detection Model Area Scan Camera (2D)Articulated Robot Ball Screw / Lead Screw Battery Pack Bimanual Manipulation Platform CAD / Geometry Engine Centric (3-Jaw) Gripper Cycloidal / RV Reducer Deburring / Grinding Tool Electric Linear Actuator Electric Motor (Rotary)Encoder Fleet Management Software Grasp / Manipulation Model Hardware Harmonic / Strain Wave Drive Humanoid Robot Inertial Measurement Unit (IMU)Integrated Joint Actuator Legged Robot (Non-humanoid)LiDAR Scanner Linear Guide / Rail Magnetic Gripper Mobile Ground Robot (AMR/AGV)Motion Planning Library Motor Driver / Servo Drive Multi-Finger/Anthropomorphic Hand Planetary Gearbox Pre-trained Vision Model Programmable Logic Controller (PLC)Proximity/Distance Sensor Robot Controller Robot Operating System / Middleware Robot Programming Environment SLAM / Navigation Software Safety Laser Scanner Safety Light Curtain Screwdriver/Drill EOAT Simulation Software Single-Board Computer / Embedded Soft / Adaptive Gripper System Integration Tactile / Pressure Sensor Tool Changer Two-Finger (Parallel) Gripper Vacuum/Suction Gripper Vision Processing Library

ATI Nano25 Force/Torque Sensor

ATI Industrial Automation

Miniature 6-axis force/torque sensor (Fx/Fy to ~250 N depending on calibration) for fine force sensing in fingertips, small grippers and medical robotics.

ATI Mini45 Force/Torque Sensor

ATI Industrial Automation

Compact high-capacity 6-axis force/torque sensor (Fx/Fy to ~580 N depending on calibration) with silicon strain gauges for robotic assembly and testing.

Robotiq FT 300-S Force/Torque Sensor

Robotiq

Plug-and-play 6-axis force/torque sensor for cobots measuring ±300 N and ±30 N·m with 500% overload, IP65 and calibration-free operation.

ATI Axia80 Force/Torque Sensor

ATI Industrial Automation

Compact 6-axis force/torque sensor measuring up to 500 N and 20 N·m with 16-bit resolution and EtherCAT/Ethernet output at up to 8 kHz, IP64, 0.28 kg.

Humanoid Robot Six-Axis Force Sensor LA57 (人形机器人六维力传感器 LA57)

Link-touch

LA57 is a six-dimensional (6-axis) force/torque sensor for humanoid robots, measuring Fx, Fy, Fz and Mx, My, Mz for interaction and load feedback. It is intended for dynamic mechanical feedback to support force control, compliance, and safer human-robot interaction during motion and manipulation.