ProductsMagnetic Gripper

Magnetic Gripper Products

5 listed

Compare 5 Magnetic Gripper models from SMC and OnRobot — sourced specs side by side: Holding Force, Magnet Type and Weight.

3D/Depth Camera (RGB-D)Angular (Rotary) Gripper Anomaly Detection Model Area Scan Camera (2D)Articulated Robot Ball Screw / Lead Screw Battery Pack Bimanual Manipulation Platform CAD / Geometry Engine Centric (3-Jaw) Gripper Cycloidal / RV Reducer Deburring / Grinding Tool Electric Linear Actuator Electric Motor (Rotary)Encoder Fleet Management Software Force/Torque Sensor Grasp / Manipulation Model Hardware Harmonic / Strain Wave Drive Humanoid Robot Inertial Measurement Unit (IMU)Integrated Joint Actuator Legged Robot (Non-humanoid)LiDAR Scanner Linear Guide / Rail Mobile Ground Robot (AMR/AGV)Motion Planning Library Motor Driver / Servo Drive Multi-Finger/Anthropomorphic Hand Planetary Gearbox Pre-trained Vision Model Programmable Logic Controller (PLC)Proximity/Distance Sensor Robot Controller Robot Operating System / Middleware Robot Programming Environment SLAM / Navigation Software Safety Laser Scanner Safety Light Curtain Screwdriver/Drill EOAT Simulation Software Single-Board Computer / Embedded Soft / Adaptive Gripper System Integration Tactile / Pressure Sensor Tool Changer Two-Finger (Parallel) Gripper Vacuum/Suction Gripper Vision Processing Library

SMC MHM-50

SMC

Permanent-magnet gripper, 50mm body, up to 1000N holding force on 6mm-thick steel; holds the workpiece even with power/air off.

SMC MHM-32

SMC

Permanent-magnet gripper, 32mm body, up to 500N holding force on 6mm-thick steel; holds the workpiece even with power/air off.

SMC MHM-25

SMC

Permanent-magnet gripper, 25mm body, up to 200N holding force on 6mm-thick steel; holds the workpiece even with power/air off.

SMC MHM-16

SMC

Permanent-magnet gripper, 16mm body, up to 50N holding force on 6mm-thick steel; holds the workpiece even with power/air off.

OnRobot MG10

OnRobot

Electric magnetic gripper handling up to 10 kg of ferromagnetic parts with adjustable strength and built-in sensing — no compressed air, for machine tending.