Photos, datasheets & media
Specs and sources stay open to everyone. Sign in to see the imagery and documents members contribute.
The INSPIRE-ROBOTS RH56DFTP is a 5-finger anthropomorphic robotic dexterous hand end-effector with integrated tactile feedback. It provides 6 DOF (12 joints) using a linear-drive architecture with micro linear servo actuators, and supports common industrial communications such as RS485/Modbus RTU and CAN (variant-dependent).
Save it, compare it or record that you have used it — with an account.
The INSPIRE-ROBOTS RH56DFTP is a 5-finger anthropomorphic robotic dexterous hand end-effector with integrated tactile feedback. It provides 6 DOF (12 joints) using a linear-drive architecture with micro linear servo actuators, and supports common industrial communications such as RS485/Modbus RTU and CAN (variant-dependent).
8 other Multi-Finger/Anthropomorphic Hand products, closest hero specs and price first. Suggestions, not recommendations.
RH56DFTP Inpsire
This product
RH56BFX Inspire
Beijing Inspire-Robots Technology Co., Ltd. (INSPIRE-ROBOTS)
PSYONIC Ability Hand
PSYONIC
LinkerBot Linker Hand O6
LINKERBOT
DH Robotics DH-5-6
DH Robotics
MagicLab MagicHand S01
MagicLab
This product is part of the Birdwave Atlas community.
Contribute evaluations, share integrations and help improve compatibility data.
Discussions, evaluations, integrations and updates
Discussions and reviews are for members
Sign in to read what members say about RH56DFTP Inpsire and to add your own evaluation, integration notes or spec fixes.
Sign in to join the discussionUser interfaces: Ethernet, RS485 and CAN2.0. Shipped interface combinations are Modbus TCP + CAN2.0 or Modbus TCP + RS485. Protocols documented by the vendor: RS485/CAN register protocol, Modbus RTU and Modbus TCP. RS485 runs 115200 bps, 8 data bits, 1 stop bit, no parity; up to 254 hands on one bus. CAN2.0 addresses up to 16383 hands on one bus. Modbus TCP is addressed by IP and port (vendor default 192.168.11.210:6000).