Name: Dobot CR10A
Brand: Dobot

Overview

The CR10A is part of Dobot's CR A-series collaborative robot arms, built for flexible automation tasks such as pick-and-place, machine tending and palletizing. It carries PLd Cat.3 safety certification (ISO 13849-1, ISO 10218-1, ISO/TS 15066) and supports Modbus TCP/RTU, EtherNet/IP and PROFINET for integration into existing factory networks.

Key features

ISO 9409-1 tool flange
PLd Cat.3 safety certified
Modbus/EtherNet-IP/PROFINET support
Any-orientation installation

What it needs

Derived from its documented connections — mechanical, electrical, software.

Dobot CR tool connector (M8 8-pin) · this is the robot side · tool-side connector
Who provides it
ISO 9409-1-50-4-M6 tool flange · this is the robot side · wrist flange
Who provides it
SignalEtherNet/IP · the other side must speak it too · Fieldbus protocol support for the CR-series. gender:neutral, same reasoning as modbus-tcp above.
Who provides it
SignalModbus TCP · the other side must speak it too · Fieldbus protocol support for the CR-series; gender:neutral -- no universal connector-gender convention for industrial fieldbus (unlike RJ45), and the physical connector type isn't specified in the source.
Who provides it
SignalPROFINET · the other side must speak it too · Fieldbus protocol support for the CR-series. gender:neutral, same reasoning as modbus-tcp above.
Who provides it
SignalRS-485 serial · the other side must speak it too · on Dobot CR tool connector (M8 8-pin), pins 1–2 · Tool connector pins 1/2 (485A/485B), multiplexed with 2 analog inputs. Higher-layer protocol not named in the manual.
Who provides it

Fits with

Two-Finger (Parallel) Gripper 14 · Vacuum/Suction Gripper 7 · Multi-Finger/Anthropomorphic Hand 5

26 derived from documented connections

Two-Finger (Parallel) Gripper

See all 14 that fit

DH Robotics AG-145fits mechanically
unknown: connects on dobot-cr-tool-connector
DH Robotics AG-95fits mechanically
unknown: connects on dobot-cr-tool-connector
DH Robotics PGC-140-50fits mechanically
unknown: connects on dobot-cr-tool-connector
DH Robotics PGC-300-60fits mechanically
unknown: connects on dobot-cr-tool-connector

Vacuum/Suction Gripper

See all 7 that fit

Coval CVGC 150x150fits mechanically
unknown: connects on dobot-cr-tool-connector
OnRobot VGC10fits mechanically
unknown: connects on dobot-cr-tool-connector
Schmalz FXCB Area Gripping Systemfits mechanically
unknown: connects on dobot-cr-tool-connector
SMC ZGPfits mechanically
unknown: connects on dobot-cr-tool-connector

Multi-Finger/Anthropomorphic Hand

See all 5 that fit

Tesollo DG-3F-Mfits mechanically
unknown: connects on dobot-cr-tool-connector
Tesollo DG-4Ffits mechanically
unknown: connects on dobot-cr-tool-connector
Tesollo DG-5F-Mfits mechanically
unknown: connects on dobot-cr-tool-connector
Tesollo DG-5F-Sfits mechanically
unknown: connects on dobot-cr-tool-connector

Alternatives

8 other Articulated Robot products, closest hero specs and price first. Suggestions, not recommendations.

Compare in a table

All of them:Degrees of Freedom 6

ProductMaximum ReachRepeatabilityPayload CapacityPrice

Dobot CR10A

This product

Maximum Reach1300 mm

Repeatability0.03 mm

Payload Capacity10 kg

Price—

Side by side:Dobot CR10A vs Dobot Nova 5 Dobot CR10A vs Dobot Nova 2 Dobot CR10A vs Huayan E10-L-Pro (Force Control)

This product is part of the Birdwave Atlas community.

Contribute evaluations, share integrations and help improve compatibility data.

Community feed

Discussions, evaluations, integrations and updates

Specifications

General

Degrees of Freedom

6

Maximum Reach

1300 mm

Repeatability

0.03 mm

Mounting Position

any

IP Rating

IP54

Drive Type

electric

Controller Included

Yes

Payload Capacity

10 kg

Weight

40 kg

End-Effector I/O

4 DI, 4 DO, 4 AI (AI shared with RS485)

Maximum Linear Speed

5 m/s

Safety Certification

PLd Cat.3 (ISO 13849-1, ISO 10218-1, ISO/TS 15066)

Dobot CR10A

At a glance

Overview

Key features

What it needs

Fits with

Two-Finger (Parallel) Gripper

Vacuum/Suction Gripper

Multi-Finger/Anthropomorphic Hand

Alternatives

Community feed

Specifications

Dobot CR10A

At a glance

Overview

Key features

What it needs

Fits with

Two-Finger (Parallel) Gripper

Vacuum/Suction Gripper

Multi-Finger/Anthropomorphic Hand

Alternatives

Community feed

Specifications