SMC LEHZJ Series vs SMC MHK2
- SMC LEHZJ Series by SMC
- SMC MHK2 by SMC
Specifications as each maker states them, side by side. The (i) beside a value links to its source.
Compare specifications
9 of 12 specs differ across 2 models
| Spec | SMSMC LEHZJ Series | SMSMC MHK2 |
|---|---|---|
| General | ||
| Stroke per Finger | 2–7 mm | 2–11 mm |
| Max Gripping Force | 3–40 N | 14–80 N |
| Actuation | electric | pneumatic |
| Weight | 0.14–0.61 kg | 0.075–0.565 kg |
| Min Gripping Force | 3–16 N | — |
| Max Opening Width | 4–14 mm | 13–41 mm |
| Operating Pressure/Voltage | 24 VDC ±10% | 0.1-0.6 MPa (double acting); 0.25-0.6 MPa (single acting, normally open/closed) |
| Repeatability | 0.02 mm | 0.01 mm |
| IP Rating | Equivalent to IP50 (sealed dust cover on the finger/mechanism portion only; motor body is not sealed) | — |
| Gripping Detection | Yes | Yes |
| Mounting Interface | Body tapped mounting via 3 options (thread on the side of the body, on a mounting plate, or on the back of the body), each located by a positioning pin -- the same 3 variations as LEHZ. A foreign-matter protection seal is included for the side-mount option. | Body-tapped or through-hole mounting from 3 directions (axial, vertical, lateral) using metric bolts scaling with bore size (M3x0.5 @12mm, M4x0.7 @16mm, M5x0.8 @20mm, M6x1 @25mm bore), plus a positioning pin hole on the top face for repeatable alignment. Fingers are customer-supplied stock attached via threaded mounting holes. Interchangeable with SMC's MHQG2 series. |
| Operating Temperature Range | 5 to 40°C | -10 to 60°C (ambient and fluid) |