NEURA LARA 5 vs NEURA MAiRA S
Specifications as each maker states them, side by side. The (i) beside a value links to its source.
Compare specifications
13 of 30 specs differ across 2 models
| Spec | NENEURA LARA 5 | NENEURA MAiRA S |
|---|---|---|
| General | ||
| Degrees of Freedom | 6 | 7 |
| Maximum Reach | 800 mm | 1100 mm |
| Repeatability | 0.02 mm | 0.01 mm |
| Payload Capacity | 5 kg | 15 kg |
| Joint Speed | 200 °/s | 200 °/s |
| Mounting Position | any | any |
| IP Rating | IP66 | IP65 |
| Drive Type | electric | electric |
| Controller Included | Yes | Yes |
| Arm Type | Collaborative robot (cobot), 6 rotary joints | Cognitive collaborative robot (cobot), 7 rotary joints |
| Base Plate Mounting Pattern | Bolt circle Ø 140 mm (Ø 156 mm base footprint) | — |
| Communication Protocols | Modbus RTU (tool bus), Modbus TCP, EtherNet/IP, USB 3.0 (controller) | Modbus RTU (tool bus), Modbus TCP (control box), FSoE (safety) |
| Connector Type | M12 | — |
| Encoder Resolution | 24 bit | — |
| I/O Ports | Tool: M12 12-pin A-coded male (IEC 61076-2-101), 24 V max 1500 mA. Controller: 8× GPIO, Modbus TCP, EtherNet/IP, USB 3.0, Safe I/Os | Tool: M8 8-pin A-coded male (IEC 61076-2-104) — analog input, GPIO, Modbus RTU; 24 V 1.5 A. Control box: GPIO, Modbus TCP |
| Input Voltage Range | 100–240 V AC, 50/60 Hz (control box) | 100–240 V, 50/60 Hz, max. 16 A (control box) |
| Mounting Flange | DIN ISO 9409-1-50-4-M6 | DIN ISO 9409-1-50-7-M6 |
| Number of Analog Inputs | 2 | — |
| Number of Digital Inputs | 3 | — |
| Number of Digital Outputs | 3 | — |
| Operating Temperature Range | 0 °C – 40 °C | 0 °C – 40 °C |
| SDK | NeuraPy API (Python) | NeuraPy Python API (SDK) — robot and sensor data |
| Safety Functions | Safe position, speed, torque, limits and I/Os (Safe Master architecture) | Safety master and FSoE communication |
| Weight | 26 kg | 51 kg |
| Integrated Force Sensing | — | Yes |
| Peak Payload Capacity | — | 18 kg |
| Payload Definition (Nominal) | — | Full workspace |
| Payload Definition (Peak) | — | Application-specific smaller workspace at reduced speed |
| Encoder/Feedback | — | Dual encoder in each axis |
| Sensors | — | 3D vision sensor; 3D voice recognition sensor and speaker; 6-DoF force/torque sensor in flange (optional); dual encoder on each axis |