Dobot CR10A vs Stäubli TX2touch-90L
Specifications as each maker states them, side by side. The (i) beside a value links to its source.
Compare specifications
4 of 19 specs differ across 2 models
| Spec | DODobot CR10A | STStäubli TX2touch-90L |
|---|---|---|
| General | ||
| Degrees of Freedom | 6 | 6 |
| Maximum Reach | 1300 mm | 1200 mm |
| Repeatability | 0.03 mm | 0.035 mm |
| Payload Capacity | 10 kg | 10 kg |
| Mounting Position | any | — |
| IP Rating | IP54 | IP65 (IP67 at wrist) |
| Drive Type | electric | — |
| Controller Included | Yes | Yes |
| Weight | 40 kg | 114 kg |
| Max TCP Speed | — | 11.1 m/s |
| Joint Speed | — | 760 °/s |
| Encoder Resolution | — | 19 bit |
| Encoder Type | — | Absolute |
| PL Rating | — | PL e |
| Pass-Through Utilities | — | Integrated electrical and pneumatic user circuit including Cat5e; sealed vertical cable routing available as an option |
| SIL Rating | — | SIL 3 |
| Safety Functions | — | Safe limited speed, safe stop, safe zone, safe tool, safe touch (5 modular SIL3-PLe functions) |
| Supported communications / fieldbus options | — | CS9 standard: EtherCAT Master, Modbus TCP/IP server & client, Sercos III slave, EtherNet/IP adapter, PROFINET IO-Device, EtherCAT slave, PowerLink controlled node, FSoE slave, 2x Ethernet, RS232. Optional PCIe: ASI master, CC-Link client, PROFIBUS DP master & slave, EtherNet/IP scanner & adapter, PROFINET IO-controller & device, EtherCAT master & slave, Sercos III master & slave; OPC UA server |
| Tactile Sensing | — | Yes |