SMC JMHZ2
Compact linear-guide parallel gripper, pneumatic, 4 bore sizes (8/12/16/20mm).
Compare models
9 of 13 specs differ across 4 models
| Spec | JMJMHZ2-12D | JMJMHZ2-16D | JMJMHZ2-20D | JMJMHZ2-8D |
|---|---|---|---|---|
| General | ||||
| Stroke per Finger | 3 mm | 5 mm | 7 mm | 2 mm |
| Max Gripping Force | 23.3 N | 43.5 N | 72.2 N | 10.5 N |
| Actuation | pneumatic | pneumatic | pneumatic | pneumatic |
| Weight | 0.065 kg | 0.128 kg | 0.24 kg | 0.031 kg |
| Min Gripping Force | 17.5 N | 32.7 N | 54.2 N | 7.8 N |
| Max Opening Width | 30 mm | 40 mm | 50 mm | 20 mm |
| Operating Pressure/Voltage | 0.1 to 0.7 MPa (double acting) | 0.1 to 0.7 MPa (double acting) | 0.1 to 0.7 MPa (double acting) | 0.15 to 0.7 MPa (double acting) |
| Repeatability | 0.01 mm | 0.01 mm | 0.01 mm | 0.01 mm |
| Gripping Detection | Yes | Yes | Yes | Yes |
| Bore Diameter | 12 mm | 16 mm | 20 mm | 8 mm |
| Max Force Limit | 33 N | 62 N | 100 N | 14 N |
| Mounting Interface | Body-mount via tapped holes, axial or lateral (3 ways from 2 directions); 2 dowel-pin holes on the mounting face for repeatable remounting. Fingers are a built-in part; customer-designed jaw attachments bolt onto them via threaded holes in basic (tapped), side-tapped, or through-hole configurations. Auto-switch mounting groove on both body sides. | Body-mount via tapped holes, axial or lateral (3 ways from 2 directions); 2 dowel-pin holes on the mounting face for repeatable remounting. Fingers are a built-in part; customer-designed jaw attachments bolt onto them via threaded holes in basic (tapped), side-tapped, or through-hole configurations (M3 x 0.5, 0.59 N·m tightening torque, confirmed for this bore size). Auto-switch mounting groove on both body sides. | Body-mount via tapped holes, axial or lateral (3 ways from 2 directions); 2 dowel-pin holes on the mounting face for repeatable remounting. Fingers are a built-in part; customer-designed jaw attachments bolt onto them via threaded holes in basic (tapped), side-tapped, or through-hole configurations. Auto-switch mounting groove on both body sides. | Body-mount via tapped holes, axial or lateral (3 ways from 2 directions); 2 dowel-pin holes on the mounting face for repeatable remounting. Fingers are a built-in part; customer-designed jaw attachments bolt onto them via threaded holes in basic (tapped), side-tapped, or through-hole configurations. Auto-switch mounting groove on both body sides. |
| Operating Temperature Range | -10 to 60°C (no freezing) | -10 to 60°C (no freezing) | -10 to 60°C (no freezing) | -10 to 60°C (no freezing) |