Connector — mechanical
Techman TM5 flange (50-4-M6, 2 dowel pins)
- Slug
- techman-tm5-flange-50-4-m6-2pin
- Domain
- mechanical
- About
- Techman TM-series tool flange: claims ISO 50-4-M6 but ships two dowel pins where ISO defines one. Asymmetric — an ISO tool bolts onto a TM5, but a TM5-built tool will not fit a plain ISO flange.
Mount
Verify- Pitch circle
- Ø50 mm
- Holes
- 4 × M6 · first at 45° · every 90°
- Through Ø
- Ø6.6 mm (derived: nominal + 0.6)
- Pin
- 2 × Ø6 mm H7 at 0°
- Centering
- Ø31.5 mm H7
- Outer
- Ø63 mm
- Source
- Vendor claims ISO 9409-1-50-4-M6, so the bolt circle is Table 1's; Techman fits TWO dowel pins where ISO defines one and the second pin's angular position is not published — the 180 deg placement here is the renderer's default, not a sourced value.
Products using this connector(1)
- robot side×1